ZF1 CR-Z
After much testing the CR-Z (ZF1) DA damper kit that can be used from street to winding roads has been developed. A key feature was the pursuit of maintain a comfortable cursing feeling as well as incorporating sporty handling characteristics. Enjoy the performance of this stock +α damper kit.
ZF1 FIGHTEX Damper KIT
*Click the damper images below to see larger pictures.
| Type |
Adjustable bottom brackets. The dual adjustable type allows quick and easy adjustment of the total length.
The total length of the damper can be tuned via the bottom bracket. The car ride height can be adjusted without touching the spring pre-load. Helping to find the delicate balance of traction and grip, through the various independent parameters of ride height, spring pre load and rebound stroke lengths. 
|
|
| Kit contents | Damper + Spring | |
| Model | ZF1（CR-Z） | |
| Part No. | 51521-ZF1-000 | |
| Price (KIT) | ￥294,000 | |
| Price (damper only) | 51522-ZF1-000 ￥271,000 |
|
| Supplied spring rate [kgf/mm-mm] |
Front | 8K-160 |
| Rear | 5K-160 | |
| 車高調整幅 純正比 | Front | approx. ±0mm～-45mm160 |
| Rear | approx. ±0mm～-45mm | |
| Design | F:Upside down design / R:Standard design | |
| Remarks | *The car height adjustment unit is included for the rear spring. *Front bottom bracket can change camber angle. (Compared to standard ±0°, -1.5°, -3.0°) *Require modification for rear spring rubber. |
|
Spring rate can be changed at the time of order with no additional cost (depending on the spring rate, damping force may need to be changed with extra cost).
Damping force can be changed at the time of order. (Additional charge ¥25,000 ~ /set)
Damper KIT contents: Damper, main spring, car height adjustment lower unit (rear), spring upper seat, spring lower seat, lock seat, dust boot, car height adjustment wrench, damping force adjustment wrench, instruction manual.