F20C/F22C S2000
I Type
Defric coating (Lubricous film) is applied to the piston skirt, for a reduction in friction and loads as well as improved durability.
Strengthened chrome molly I section connecting-rods are included.
F20C/F22C (S2000) Increased Capacity 2400KIT NA I Type High Comp
You can scroll horizontally.
| Engine Type | F20C/F22C 2400KIT-I（2378） | F20C/F22C 2400KIT-I（2405） |
| Part No. | 13001-F20-400-I | 13001-F20-401-I |
| Price (set) | ￥948,000 | ￥948,000 |
| Bore×Stroke | ø87.00×100.0mm | ø87.50×100.0mm |
| Displacement | 2378cc | 2405cc |
| Crown Volume *1 | －0.56cc/5.38cc | －0.56cc/5.45cc |
| Projection Height | ＋1.0mm（from the deck of the block） | ＋1.0mm（from the deck of the block） |
| Reference C/R *2 | Standard head GK t=0.6mm ξ≒12.12 ：1 | Standard head GK t=0.6mm ξ≒12.27 ：1 |
| Based on standard piston pin diameter. *1:Crown volume is measured "from the piston shoulder"/"from the deck of the block". *2:The compression ratio given above are only to be taken as a guide, measurements are required. Cylinder head combustion chamber may need a boring modification to gain sufficient clearance. Cylinder skirt of the block may need a modification to gain sufficient clearance. |
||
F20C/F22C (S2000) Increased Capacity 2400KIT NA I Type Ultra High Comp
You can scroll horizontally.
| Engine Type | F20C/F22C 2400KIT-IH（2378） | F20C/F22C 2400KIT-IH（2405） |
| Part No. | 13001-F20-400-IH | 13001-F20-401-IH |
| Price (set) | ￥948,000 | ￥948,000 |
| Bore×Stroke | ø87.00×100.0mm | ø87.50×100.0mm |
| Displacement | 2378cc | 2405cc |
| Crown Volume *1 | 3.3cc/9.2cc | 3.3cc/9.3cc |
| Projection Height | ＋1.0mm（from the deck of the block） | ＋1.0mm（from the deck of the block） |
| Reference C/R *2 | Standard head GK t=0.6mm ξ≒13.0 ：1 | Standard head GK t=0.6mm ξ≒13.2 ：1 |
| Based on standard piston pin diameter. *1:Crown volume is measured "from the piston shoulder"/"from the deck of the block". *2:The compression ratio given above are only to be taken as a guide, measurements are required. Cylinder head combustion chamber may need a boring modification to gain sufficient clearance. Cylinder skirt of the block may need a modification to gain sufficient clearance. |
||
You can scroll horizontally.
| KIT Contents | |
| 1 | TODA forged piston KIT ø87.0mm / ø87.50mm (2378cc/2405cc) |
| 2 | Special billet crankshaft (Long stroke, High accuracy dynamic balanced) (→Here is Special billet crankshaft) |
| 3 | I section chrome molly connecting-rods(Fully floating with Bush & balanced) (→Here is I section connecting-rods) |