GG3S ATENZA
GG3S FIGHTEX Damper KIT
*Click the damper images below to see larger pictures.
| Type |
Made To Order 
Adjustable bottom brackets. The dual adjustable type allows quick and easy adjustment of the total length.
The total length of the damper can be tuned via the bottom bracket. The car ride height can be adjusted without touching the spring pre-load. Helping to find the delicate balance of traction and grip, through the various independent parameters of ride height, spring pre load and rebound stroke lengths. 
|
|
| Kit contents | Damper + Spring + Pillow ball upper Mount | |
| Model | GG3S (ATENZA) | |
| Part No. | 51520-GG3-000 | |
| Price (KIT) | ￥379,000～ *Please ask |
|
| Price (damper only) | 51522-GG3-000 ￥323,000～ *Please ask |
|
| Price (damper + spring) | 51521-GG3-000 ￥346,000～ *Please ask |
|
| Supplied spring rate [kgf/mm-mm] |
Front | 12K-200 |
| Rear | 12K-180(ID75mm) | |
| Accessories | Rear upper units and lower seats for the ca height adjustment. | |
| Design | F/R Standard design | |
| Remarks | The car height adjustment unit and spring seat are included for the rear spring. *Rear spring is ID75 ( Spring rate can not be changed.) *Rear damper has the pillow-ball ends for both side. *Rear standard bump rubber is required to cut off one step for a stroke clearance. |
|
Spring rate can be changed at the time of order with no additional cost (depending on the spring rate, damping force may need to be changed with extra cost).
Damping force can be changed at the time of order. (Additional charge ¥25,000 ~ /set)
Damper KIT contents: Damper, main spring, pillow-ball upper mount, rear upper unit, spring upper seat, spring lower seat, lock seat, dust boot (rear), car height adjustment wrench, damping force adjustment wrench, instruction manual.
Note: Basically Fightex damper is designed to be based on the standard upper mount. When pillow-ball upper mount kits are not available, the spring upper seat for the standard upper mount is provided.