FA20 TOYOTA 86/SUBARU BRZ
The increased displacement improves low speed torque as well as the performance throught the whole rpm range.
High-Comp spec with the compression ratio 0.7 higher than std (12.5:1)
Defric coating (Lubricous film) is applied to the piston skirt, for a reduction in friction and loads as well as improved durability.
This product requires TODA Power Liner KIT and TODA Head Gasket.
FA20 Increased Capacity 2300 KIT
You can scroll horizontally.
| Engine Type | FA20（TOYOTA 86/SUBARU BRZ） | |||
| Part No. | 13001-FA2-0R0-I | 13001-FA2-0R1-I | ||
| Price (set) | ￥636,000 | ￥662,000 | ||
| Bore×Stroke | ø89.20×90mm | ø89.70×90mm | ||
| Displacement | 2250cc | 2275cc | ||
| Crown Volume *1 | 0.90cc/-1.60cc | 0.86cc/-1.64cc | ||
| Projection Height ※2 | -0.5mm | |||
| Reference C/R *3 | TODA haed GK t=0.6mm ξ≒13.2 : 1 | TODA haed GK t=0.6mm ξ≒13.3 : 1 | ||
|
*1:Crown volume is measured "from the piston shoulder"/"from the deck of the block". *2:Piston shoulder height is measured from the deck of the block. *3:The compression ratios given above are only to be taken as a guide, measurements are required. |
||||
You can scroll horizontally.
| KIT Contents | |
| 1 | TODA forged piston KIT ø89.20mm / ø89.70mm |
| 2 | Special crankshaft (Long stroke, High accuracy dynamic balanced) |
| 3 | I Section Strengthened Connecting-rods (Fully floating with bush & balanced) |
| 4 | Connecting-rod bearings |