ZN8 GR86
symmtory_DA_5804-02_150x100_400.jpg)
ZN8 FIGHTEX Damper KIT
*Click the damper images below to see larger pictures.
| Type |
Adjustable bottom brackets. The dual adjustable type allows quick and easy adjustment of the total length.
The total length of the damper can be tuned via the bottom bracket. The car ride height can be adjusted without touching the spring pre-load. Helping to find the delicate balance of traction and grip, through the various independent parameters of ride height, spring pre load and rebound stroke lengths. 
|
||||
| Kit contents | Damper + Spring + Pillow ball upper Mount | ||||
| Model | ZN8（TOYOTA GR86） | ||||
| Part No. | 51520-ZN8-000 | ||||
| Price (KIT) | ￥372,000 | ||||
| Price (damper only) | 51522-ZN8-000 ￥284,000 |
||||
| Price (damper + spring) | 51521-ZN8-000 ￥307,000 |
||||
| Option |
Pillow-ball bush (R ¥10,000) |
||||
| Supplied spring rate [kgf/mm-mm] |
Front | 6K-160 | |||
| Rear | 7K-200 | ||||
| 車高調整幅 純正比 | Front | approx. +30mm～-30mm | |||
| Rear | approx. +40mm～-30mm | ||||
| Design | F:Upside down design / R:Standard design | ||||
| Remarks | *Front bottom bracket can change camber angle. (Compared to standard ±0°, -1.7°, -3.5°) |
||||
Spring rate can be changed at the time of order with no additional cost (depending on the spring rate, damping force may need to be changed with extra cost).
Damping force can be changed at the time of order. (Additional charge ¥25,000 ~ /set)
Damper KIT contents: Damper, main spring, pillow-ball upper mount, spring upper seat, spring lower seat, lock seat, dust boot (rear), car height adjustment wrench, damping force adjustment wrench, instruction manual.
Note: Basically Fightex damper is designed to be based on the standard upper mount. When pillow-ball upper mount kits are not available, the spring upper seat for the standard upper mount is provided.