CZ4A LANCER EVO10
CZ4A FIGHTEX Damper KIT
*Click the damper images below to see larger pictures.
| Type |
Adjustable bottom brackets. The dual adjustable type allows quick and easy adjustment of the total length.
The total length of the damper can be tuned via the bottom bracket. The car ride height can be adjusted without touching the spring pre-load. Helping to find the delicate balance of traction and grip, through the various independent parameters of ride height, spring pre load and rebound stroke lengths. 
|
Dual adjustment Gymkhana spec.
Designed for Gymkhana use only. 18 step damping force adjustment + full length adjustment. Designed for all the forms of Gymkhana found in Japan, the DA-G allows the car to be set up for the various conditions found at the track suck as weather and track surface. Drivers in the Japan championship use the adjustability to continually test and fine tune to find that winning advantage. The adjustability also allows you to continually get the best out of the latest tire compounds.
|
|
|
|
|
||
| Kit contents | Damper + Spring + Pillow ball upper Mount | Damper + Spring + Pillow ball upper Mount | |
| Model | CZ4A（LANCER） | CZ4A（LANCER） | |
| Part No. | 51520-CZ4-000 | 51530-CZ4-000 | |
| Price (KIT) | ￥342,000 | ￥368,000 | |
| Price (damper only) | 51522-CZ4-000 ￥254,000 |
51532-CZ4-000 ￥280,000 |
|
| Price (damper + spring) | 51521-CZ4-000 ￥277,000 |
51531-CZ4-000 ￥303,000 |
|
| Supplied spring rate [kgf/mm-mm] |
Front | 12K-200 | 14K-200 |
| Rear | 10K-200 | 12K-200 | |
| Adjustable height range to standard height | Front | approx. +20mm～-35mm | approx. +20mm～-35mm |
| Rear | approx. +20mm～-30mm | approx. +20mm～-30mm | |
| Design | F:Upside down design / R:Standard design | F:Upside down design / R:Standard design | |
Spring rate can be changed at the time of order with no additional cost (depending on the spring rate, damping force may need to be changed with extra cost).
Damping force can be changed at the time of order. (Additional charge ¥25,000 ~ /set)
Damper KIT contents: Damper, main spring, pillow-ball upper mount, spring upper seat, spring lower seat, lock seat, dust boot (rear), car height adjustment wrench, damping force adjustment wrench, instruction manual.
Note: Basically Fightex damper is designed to be based on the standard upper mount. When pillow-ball upper mount kits are not available, the spring upper seat for the standard upper mount is provided.